Winfar Transport developed the special YHHF- 400Ⅱpreheater according to customers demand. This hot melt kettle is only 1.26M high, which can be transported into underground parking lot carried by trucks. During the underground parking lots thermoplastic marking work, this type pre-heater can continuously melt coating preparing for the hot melt applicator. Greatly improve the efficiency of the underground parking lot construction.

The hydraulic double cylinder thermoplastic pre-heater is the major equipment used for melting hot melt paint. After four generations of hot melt kettle innovation, Winfar Transport exclusive designed the YHHF-C 1000Ⅱ energy-saving hot melt kettle.Which has both a diesel & LPG heating system and can save at least 15% fuel.

YHRJ-Z road marking machine is the self-propelled / hand guided thermoplastic road marking machine. It is widely used in marking highways, city urban roads, parking lots, mountain roads, factory warehouses and so on.

Vibration lines are now widely used all around the world. So we design this YHTQ-Z automatic convex road marking machine. This raised line makes the drivers feel more obvious. In addition to the highways edge lines, the entrance ramps now the deceleration zones nearby school, the blind roads, the edge lines of city streets, stops lines, etc have all used convex lines, to remind the driver slow down and reduce traffic accidents.

YHDJ-S multi-function thermoplastic road marking machine is particularly suitable for new marking contractors, no need trucks, no need thermoplastic preheater, just a van, only 1-2 workers can start your business. When your marking projects become bigger, you can use it marking lines only.

YHRJ-S Hand-push/ Hand guided thermoplastic road marking machine is an small size marking machine for road line constructions. It has the advantages of low investment, fast, user-friendly, easy maintenance, suitable for the hot melt reflective markings in all kinds of highways, urban roads, vehicle parks, schools, factories, etc.

The hydraulic single cylinder thermoplastic pre-heater is the specific equipment used for melting hot melt paint. If you just start to do roadline marking construction, have not too much marking work, or only need to melt one color coating, this single-cylinder hot melt kettle will be much more suitable for you.

The hydraulic double cylinder thermoplastic pre-heater is the major equipment used for melting hot melt paint. It can be called hot melt kettle, thermoplastic paint preheater, which matched with thermoplastic road marking machine.

Hand-pushed cold paint road marking machine is the common equipment for road marking at room temperature,and is used for straight line, dotted line, induced lines, zebra crossing, text, graphics in the field of roads, urban areas, squares,car parks, airports and so on.